新款 ADI Blackifn 仿真器-- ADZS-ICE-100B -- 只售150美元 |
Analog Devices Blackfin 仿真器，ADZS-ICE-100B，为ADI 的JTAG处理器和DSP提供了便捷的便携式、非侵入、基于目标的调试解决方案。这些强大的功能基于USB的仿真器可以实现宽范围的仿真功能，包括单步执行和具有预设断点的全速执行、查看和/或改变寄存器和存储器的内容。
Analog Devices Blackfin仿真器让用户只要使用主机上的高速USB 2.0端口，就可以与所有ADI的JTAG处理器和DSP进行通信。而应用程序和数据可以很容易、快速地被测试，并在仿真器和独立的VisualDSP++™开发和调试环境（下载90天免费试用版本）之间进行交换。
USB的即插即用架构使得主机操作系统可以自动检测和配置仿真器。它可以在无需关掉电脑电源的情况下断开与电脑主机的连接。
Analog Devices Blackfin 仿真器是总线供电的，可以方便用户携带，无需额外的电源。 |
 |
|
| 特性 |
- 5MHz JTAG TCLK frequency
- Support ONLY ADI Blackfin processors
- USB 2.0 interface enabling download speeds of up to 255 KB/sec
- 1.8V, 2.5V, and 3.3V compliant and tolerant
- Multiprocessor support
- IEEE 1149.1 14-pin JTAG connector
- PlugFest Certified USB Bus-powered design
- CE-certified
- ROHS Compliant
- Solder points for attaching a wire to reset the target board
|
|
| 最低系统要求 |
- Windows® 2000 SP4, Windows XP SP2 or Windows Vista™ Business/ Enterprise/ Ultimate editions
- Intel Pentium® processor (x86 compatible), 1 GHz or faster
- 512 MB RAM and 2 GB available hard disk space
- VisualDSP++ 5.0 Update 7
|
|
| 注意事项 |
- Due to the open frame design of the ADZS-100B-ICE, care must be taken when locating a JTAG interface connector on a custom target. You should ensure that no components, if located under the emulator, are taller than 0.15”.
- If you plan to use this ICE with an existing target board and are concerned that emulator components may short to the target board, an insulator should be used to provide protection.
- The ADZS-100B-ICE is sold with a 90 day warranty period.
|
|
|
只要您填妥以下信息，就有机会得到七天免费体验Analog Devices Blackfin仿真器的机会，感受它的方便及强大功能。 |
|
|
